Drager Narkomed MRI

A single vaporizer for the style 19.1 vaporizers and the volume, pressure and oxygen monitor of CORm in first generation units. The second generation units have a Drager GS type screen with volume, pressure and oxygen control. The absorber assembly has the known sensation of Narkomed but is a compatible version of MRI. The units are small and have been tested near the strongest magnets.

Fan: AV2 dual circuit pneumatic rising fan + style fan without tidal volume compensation. Volume control modes (VCV), Manual / spontaneous. Mechanical bag / ventilation switch.
Machine checklist: FDA manual checklist.
Flow meters: Traditional needle valve with glass flow screen.
Breathing circuit: Traditional absorbent head. The breathing circuit is of greater volume (two absorbent containers). You can use loose granules or pre-loaded containers. It can be used with nonrespiratory circuits.
Electrical power failure: Most functions, except for patient monitoring, are conserved during a power failure, since it is a basic pneumatic-mechanical machine.

Categories: Anesthesia Equipment, Medical equipments Tags: anestesia, equipo medicos, medical equipments

Description
Reviews (0)

Description

general

Dimensions: (W x H x D) 31.5 “x 53” x 27 “(80 x 135.3 x 68.6 cm)
Weight: 230 lbs (104.3 kg)
Battery charger weight: 3 pounds (1.36 kg)

Electricity

120 Volt Power supply 100 – 120 VAC @ 50/60 Hz
220/240 Volt Power supply 200 – 240 VAC @ 50/50 Hz

Drums

Reserve Power Time “3 hours
Charging time “16 hours

Gas delivery system

Number of gases 3 Gas capacity (O2, N2O, Air)
Oxygen discharge rate 55 L / min
Low oxygen supply
Pressure alarm 34 – 40 psi

Vaporizer

Vapor 2000
Positions 2
Fixed assembly

Fan

AV 2+
Frequency 1 – 99 (in increments of 1 BPM)
I: E Ratio 4: 1 – 1: 4,5
Inspiratory Flow 10 -100 L / min
Volume Tidal 20 -1500 mL
Adjustment of the pressure limit 15 -120 cmH2O

Oxygen monitoring

Display range 10 -100%
Resolution 1 vol% O2

Monitoring of airway pressure

Display range -10 to 125 cmH2O
Resolution 1 cmH2O

Monitoring of Tidal Volume

Display range .01 – 2.0 L
Resolution 0.01 mL

Utility requirements

The system works with a 120 VAC source at 50/60 Hz.
Regulatory sets and cylinder heads for O2 and N2O external cylinders.
O2, N2O and air hoses to connect the piping sources to the connections of the DISS machine.

Tests with MRI scanners up to 3.0 Tesla (shielded or unshielded)

Tests performed with the unit touching the magnetic resonance.

Reviews

There are no reviews yet.

Be the first to review “Drager Narkomed MRI”