Description
Optional
- SPO2 – Pulse Oximetry
- Pacemaker
- Informative mode
- External electrode adapters.
Specifications
- Dimensions
7.9 “H x 11.8” W x 15.6 “L
20cm x 30cm x 39.7cm - Weight: 24 lbs. / 10.9kg
- Battery
Type: Rechargeable, sealed acid-lead battery. 4 Ah, nominal 12 V.
Charge Time: 2 hours for 90% of total capacity. 18 hours for 100% capacity. Recharging it to less than 100% will reduce the battery life.
Capacity: 2.5 hour monitoring or 50 full energy downloads or 1 hour monitoring and recording.
Alternating Current Input: 100 to 230 VAC +/- 15%, 50/60 Hz.
Battery Indicators: LED illuminated indicates that the battery is being charged. Low battery message appears on the monitor. - Defibrillator Waveform:
damped sinusoidal
Output Energy: 2,3,5,7,10,20,30,50,70,100,150,200,300, and 360 joules.
Load Control: Press button on pallets apex and front panel.
Charging Time: Less than 5 seconds at 360 joules with functional battery installed.
Completed Charge Indicator: Display indicates available energy, also shows full charge light in apex pallet, charge tone completed.
Synchronizer: SYNC message appears on the monitor and is annotated periodically on the recorder while in synchronized mode. An audible beep sounds with each R-wave detected, while a marker on the monitor and a sync marker on the strip of the recorder indicate a point of discharge.
Palettes: Standard palettes are previous / previous. The adult electrodes (83 cm sq) slide to expose the pediatric electrodes (21 cm sq). The cable of the pallets is 10 feet (3m). A full range of internal pallets available. - Monitor
Input: The ECG activity can be seen through the palettes or the patient cable.
Bypass Fault: The LEADS OFF message (branch off) and the discontinuous base line appear on the monitor if any branches are disconnected. Common rejection mode: Greater than 100db measured according to the AAMI standards for cardiac monitors.
Deployed Heart Rate: Digital reading on the monitor from 20 to 80 beats per minute. - Recorder
Annotations: time, date, heart rate, event markers, ECG mode, and selected energy.
Recording Mode: automatically documents events and ECG during episodes of defibrillation. The recorder can be configured to operate in real time or with a delay of 6 seconds.
Frequency Response: from .5 to 40Hz in the bandwidth of the monitor. A diagnostic bandwidth of 05 to 150 Hz can be selected. .05 at 150 Hz





Reviews
There are no reviews yet.